Go to VMware Workstation > Edit > Virtual Network Editor
You will see the VMnet0 is in Auto-Bridging mode. It means that it will bridge the virtual network 0 to the best path to go to internet. Change it to the physical Ethernet network card which will be used to connect to the external physical devices.
Click on Change Settings.
You will see the VMnet0 is in Auto-Bridging mode. It means that it will bridge the virtual network 0 to the best path to go to internet. Change it to the physical Ethernet network card which will be used to connect to the external physical devices.
Now go to the Settings of the virtual machine to where you customize the hardware.
Add a Network Adapter and connect it to the custom VM network of VMnet0..
Now you can connect EVE devices to the external devices through pnet clouds.
Add a Network Adapter and connect it to the custom VM network of VMnet0..
Now you can connect EVE devices to the external devices through pnet clouds.
pnet0 is connected your 1st network adapter..
pnet1 is connected your 2nd network adapter..
So in this setup, what should be used to connect outside physical devices is pnet1..
pnet0 is used with NAT to connect to internet and to manage the UNL/EVE machine from host PC (laptop which the VMware Workstation is hosted)
Hello There. I found your blog using msn. This is a very well written article.
ReplyDeleteI will make sure to bookmark it and come back to read more of
your useful info. Thanks for the post. I'll certainly comeback.
I do not even know how I ended up here, but I thought this post was great.
ReplyDeleteI don't know who you are but definitely you are going to a famous blogger if you are not already ;) Cheers!
This is my first time go to see at here and i amm in facdt impressed to read everthing at singlle place.
ReplyDeleteA fascinating discussion is definitely worth comment.
ReplyDeleteThere's no doubt that that you need to write mre on this subject
matter, it miyht not bbe a taboo subject but typically ppeople don't speak about such topics.
To the next! Cheers!!
I need to to thank you for this wonderful read!!
ReplyDeleteI certainly loved every bit of it. I have
you book marked to look at new stuff you post…
Great post. I was checking continuously this blog
ReplyDeleteand I am impressed! Extremely useful info specially the last part
:) I care for such info much. I was looking for this particular info for a long time.
Thank you and good luck.
Hello my friend! I wish to say that this article is
ReplyDeleteamazing, great written and come with approximately all significant infos.
I would like to look more posts like this .
Hi , thank you. I was looking at a more complicated solution
ReplyDeleteI will immediately take hold of your rss feed as I can not find your email
ReplyDeletesubscription link or e-newsletter service. Do you have any?
Kindly let me understand in order that I could subscribe.
Thanks.
This blog is nice and very informative. I like this blog Please keep it up.
ReplyDeleteHowdy! Would you mind if I share your blog with my myspace group?
ReplyDeleteThere's a lot of folks that I think would really appreciate your content.
Please let me know. Cheers
hi i liked the blog... i have a question ... i have a linux host instance inside eve-ng VM on my laptop ... now i want to copy a file in my laptop drive to the linux host instance inside eve-ng vm ... how can i do this ? i hope the question is clear.
ReplyDeletei forgot to notify about the question i asked hence i and sending this message.
ReplyDeleteI have been searching online moree than three hours today, yet I never found
ReplyDeleteinteresting article like this one. Personally,
if all site owners and bloggers made good content as you did, thee net will be much more useful
than ever before.
Get more information on What is Network Connecting Devices? Definitions | Uses
ReplyDeletebut how to do a trunk with the external switch, the trunk did come up but no connectivity, spanning was showing broken in the begining , then with shared mode, i did managed to get the vlan active on the spanning three towords the trunk but still no connectivity on vlans created
ReplyDeletecan you please suggest how to host eve-ng vm over internet
ReplyDeleteIt serves as a tool for stress relief, helping to alleviate the pressures of daily life. https://petrogalant.com/
ReplyDelete